Loading... Please wait...

48 Special GM Street Rod Wiring Harness

  • Image 1
  • Image 2
  • Image 3
Price:
$225.00
SKU:
48SP-GM
Brand:
Availability:
Usually Ships Within 24 Hours
Quantity:


Product Description

Overview

Made In The USA
Made in USA
The Kwik Wire 48 Special GM Street Rod Wiring Harness is one of the best options on the market. Kwik Wire is located in Wisconsin where every bit of the harness is manufactured. All of our street rod wiring harnesses are 100% built and manufactured in the USA.

Will This Work In My Project?

This 48 Special wire harness will fit General Motors (GM) and Chevy restoration projects as a cut-to-fit harness.
This kit is designed for any General Motors (GM) made before 1979 or any General Motors (GM) model with a carburated motor including the Bel Air, Camaro, Caprice, Chevelle, Chevette, Corvair, Corvette, Coupe, El Camino, Impala, Malibu, Monte Carlo, Nomad, Nova, Pickup, Roadster, Vega, custom projects, and more!
The 48 Special wiring kit is based on and built according to GM color code specifications. Each group of wires is provided with plenty of wire length to cover virtually every GM vehicle make and model. The wire will be plenty long for your project, allowing you to cut them to the perfect length and the perfect fit for your vehicle.

What's Included?

This wiring kit comes with everything you will need to wire up your vehicle. It supports the circuits below.
Circuits Supported

1 Constant Hot -- 1 Ignition Hot -- Coil -- Hazard Lights -- Headlights -- Horn -- Turn Signals
Wiring Components Included
1. Early Model Turn Signal Plug
2. Late Model Turn Signal Plug
3. Ignition Switch Connector
4. Headlight Plugs
5. Ring Terminals
6. Alternator Plug
7. Dimmer Switch Connector
8. Wire Ties
9. Grommets
10. 14/16ga Butt Splices
11. 10/12ga Butt Splices
12. 6" Jumper Wire
13. Male & Female Push-Ons
14. Maxi Fuse/Holder/Terminals
15. Turn Signal Terminals
16. 1/4" Terminals

Unique Features

Kwik Wire Street Rod Wiring Harnesses provide beneficial features in your wiring kit that many competitors across the industry do not.
Check
Coil Kill Switch: This switch, located on the side of the fuse panel, kills power to the coil while allowing power to flow freely to the rest of the vehicle. Listen to the radio at shows while still The switch provides a peace of mind that your ride is safe when it is parked.
Check
Custom Aluminum Base Plate: The custom cut brushed aluminum base plate provides an easy solution for mounting your fuse panel inside your restoration project.
Check
Stainless Steel Fuse Cover: These street rod wire harnesses also come with a stainless steel brushed cover over the fuses to provide a very clean and custom look while protecting your fuses from the elements.
Check
Speaker Wire Included: Unlike many of the other outsourced harness options in the industry, our wiring kits include speaker wire built right into the kit to provide you less hassle during installation.
Check
50 Amp Maxi Fuse: The included 50 amp maxi fuse provides a better and safer option than fuse-able link wire when considering the safety of your wiring system for your restoration project.
Check
Full Size ATO Fuses: This kit is built using full size ATO Fuses unlike many outsourced wiring harness options that use hard-to-replace mini fuses. All fuses are included and installed according to proper engineered specifications.
Check
Hand Soldered: Every wire terminal inside the fuse panel is crimped and hand-soldered making every connection and circuit safe and reliable. Kwik Wire is the only manufacturer in the industry that goes the extra mile to hand-solder their connections in the fuse block.

The Wire

Kwik Wire 48 Special GM Street Rod Wiring Harnesses are built using the highest quality of wire in all of their kits. They use a thicker gauge of stranded wire than many competitors in the industry to ensure the safety and quality of your project. The wire sports a GXL type coating that is specifically designed to withstand the wear and tear in the engine component. GXL wire provides resistance against heat (up to 257°F), and liquid.
Each wire is GM color coded, numbered and labeled with the destination printed every four(4) inches with easy-to-read, clear and concise text. The numbering system provides easy lookup in the easy-to-use instruction book included with every street rod wiring harness. Installation is as easy as going through every wire one-by-one according to the simple instructions designed for beginners to advanced builders.
Easy To Read Wire Labels

Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Free Shipping On Orders Over $200